Pendant read

As you test switches on your pendant, the name of the switch will appear in this area.  For example, if you were to move the Character/Line/Plate switch to the Plate position, the word Plate will be displayed.

XY Pot

Turn the pot knob for the XY speed and you will see the number values change.  This will verify that the knobs are responding properly.

Z Pot

Turn the pot knob for the Z speed and you will see the number values change.  This will verify that the knobs are responding properly.

Limit Switches

1. Turn the motors switch on the pendant to the off position.

2. Manually move the machine, depressing each limit switch separately.  If the switch is responding correctly then it will be displayed here.